Last week I had the chance to fire some work in a gas kiln for the first time and the results came out today. I don’t know much about how the firing works except that the kiln chamber is starved of oxygen so oxygen is taken away from the metal oxides, but I’d like to learn more. I’m attracted to the unpredictability of the glazes in this kind of firing.
I’d prepared two reduction glazes -the first was a Crystalline pale yellow/green semi-gloss with slight speckle (1280-1300C):
China clay 18
Lithium carbonate 9
Titanium oxide 9
Copper carbonate 1
Zinc oxide 1
The feldspar I used was potash and I added Titanium dioxide as a substitute for Titanium oxide. I’ve decided to use small thrown (off the hump) vessels or sections of discarded pots for glaze tests from now on because flat tiles can’t show how much the glaze runs.
The second reduction glaze I made was a Chun type pale green glaze with crazing:
Potash feldspar 45
China clay 9
Bone ash 2
+ Red iron oxide 1
The colour was subtler than expected but I like it’s fresh, quiet quality. I find the random speckles of dolomite glazes like this one attractive.
Below: Buff stoneware. Two layers of Crystalline yellow/green glaze on outside with Duck egg blue raku glaze circles and Chun glaze inside. I like the roundness of this mug’s base in contrast to the sharper cylinder forms and the pulled handle balances it well.The ribbed texture from drawing up walls inside the form is highlighted by the way the glaze has pooled and draws attention to the way the mug was made on the wheel.
Reduction st Thomas. Duck egg blue raku inside and outside painted with crystalline yellow/green with chun type on top. Painted lines in red iron oxide. The duck egg raku glaze turned out a stunning, vibrant matt blue, I only wish I’d applied it to the outside.
Reduction st Thomas with blue slip splattered on top before bisque. Chun type green painted on outside with red iron oxide lines and turquoise spots. Inside crystalline yellow/green. I enjoy using the surface of vessels as canvases to explore abstract application of slips and glazes. This layering means I get exciting and unexpected results each time although I have to document carefully what I apply.
Buff stoneware cylinder. Inside turquoise stoneware glaze. Outside crystalline yellow/green with duck egg raku over bottom half which has created a cloudy, lichen-esque pattern. Red iron oxide details. The turquoise stoneware glaze turned an almost emerald green and had a bubbled texture.
Update: The kiln should have fired for another hour because the cone fell over instead of bending so didn’t reach optimum temperature. The glazes have been underfired which may explain why they didn’t flow much and why the raku blue was so vibrant.